Compatible movements are Fujitsu 628-101, Seiko ltp01-245 and related compatible domestic movements
 

1.      brief introduction

This product is58mmLine thermal printer, this specificationProgram developers used to guide users aim at58mm

Do hardware development, assembly, program computer development and so on.

2.      Product safetyPrecautions

The following requirements are to ensure the safe and effective use of this product.

2.1 Print head

1)In order to avoid the corrosion of the thermal print head, please do not touch the surface of the heat generator with your hand.

2) in order to avoidThermal print headIf it is corroded, please use ethanol or waterIPAWipe the paper scraps on the surface of the heating body.

3) Keep the surface of heating element dry. If water enters accidentally, please turn off the power immediately.

4The printer must not print paperless, as this will seriously damage the print roller and thermal print head.

2.2 Printing paper

1The print paper is wide57.5±0.5mm.

2)The printing paper should be stored in a dry environment to avoid moisture.

3In order to ensure print quality and product life, it is recommended to use thermal printing paper recommended by manufacturers. Printed rolls should have a paper shaft.

4) The storage period of thermal printing paper is generally only a few months, and long-lasting thermal printing paper can be used to prolong the storage time.

2.3Exception handling during use

1When paper jams due to inappropriate paper installation or paper quality issues, turn off the printer and wait10After the print head cools, open the paper bin to clear the paper jam and reload.

2)When the printing process is terminated unexpectedly, the printer must be restarted to recover.

3) If any abnormality is found during use, please turn off the printer. If it cannot be turned off, please remove the battery and forcibly turn it off.

3.      Performance specifications

Serial connection:

   Serial port interface adoptsTTLLevel, Baud rate115200,8n1pattern,4KBReceiving buffer, software and hardware flow control, when the printer's receiving area is full(大于3KB), will set busy signal(RTSPin high) and sends hexadecimal data0x13Until the receiving area makes room to clear the busy and send hexadecimal data0x11.

 

Print instructions:

Print a line of fonts by default3.75mmThe font height3mm,0.75Empty row distance of. At ordinary times, the distance between paper and line is3.75mm

 

Character description:

The Chinese characters used by the printer areGB18030Simplified Chinese character list(GBKcode), The Spanishcharacter Code Is UsedASCIIyard. When you print text, you simply send the corresponding code to the printer, adding carriage return at the end(0x0A)Just.

 

Character size:

character	The default mode
	width*Height (mm)
chinese24*24	3*3
Western Language12*24	1.5*3